The thing is, it produces less heat when running Setiathome and keeps the phone fully charged, when running Asteroids it can't keep the phone fully charged, it'll discharge to whatever value I have the minimum battery level set to,
then cycle as the battery charges, then runs, then charges again, (It used to charge harder and get warmer before an Android kernel update some six months ago, I think the charge rate is limited now)

Claggy

Does BOINC ever show the "Waiting for battery to cool down" message on your phone? I don't know how else to check if there is a battery temperature sensor.

On my phone, SETI@home will deplete the battery if I'm charging from a computer, but won't when I'm charging from a wall wart.

Not sure what either would have to do with the SETI@home troubles on your phone.

No, it doesn't, the HTC One S sits on top of the i7-2600K case, right above the Corsair H100i, it's perhaps the coolest crunching phone out there,
at work where it sits on a plastic surface it's just slightly warm, in the car when it's powered off the lighter socket it gets warmer, but doesn't change the result.

Claggy

The thing is, it produces less heat when running Setiathome and keeps the phone fully charged, when running Asteroids it can't keep the phone fully charged, it'll discharge to whatever value I have the minimum battery level set to,
then cycle as the battery charges, then runs, then charges again, (It used to charge harder and get warmer before an Android kernel update some six months ago, I think the charge rate is limited now)

Claggy

Does BOINC ever show the "Waiting for battery to cool down" message on your phone? I don't know how else to check if there is a battery temperature sensor.

On my phone, SETI@home will deplete the battery if I'm charging from a computer, but won't when I'm charging from a wall wart.

Not sure what either would have to do with the SETI@home troubles on your phone.

No, it doesn't, the HTC One S sits on top of the i7-2600K case, right above the Corsair H100i, it's perhaps the coolest crunching phone out there,
at work where it sits on a plastic surface it's just slightly warm, in the car when it's powered off the lighter socket it gets warmer, but doesn't change the result.

Claggy

My HTC One V ran okay and was fairly cool when I tested 7.06 app on it. I had it plugged into my FX-4100 for the entire time and it stayed charged.

http://setiweb.ssl.berkeley.edu/beta/show_host_detail.php?hostid=64298

Just added Seti Beta to my U2 android Mini Pc Processor and got one task. I will let you know how it goes. or look here.

---

Proud Founder and member of



Have a look at my WebCam

And the contest for the fastest ARM/Android machine has begin, apparently. You've got my three (combined) beat.

---

And the contest for the fastest ARM/Android machine has begin, apparently. You've got my three (combined) beat.

It began long ago already ;)

http://nativeboinc.org/site/host_stats

(And switched to SETI beta I started to loose ground it seems :D http://nativeboinc.org/site/detail_user/337 )

Am 38% into first WU on an HtC Inspire with "ARM ARMv7 Processor rev 1 (v7l) (1 processors)"

All is well so far

Ed F

---

My first task has completed and validated but took about three times longer to complete than the buddy PC. Is getting about 4.2 credits an hour.

http://setiweb.ssl.berkeley.edu/beta/workunit.php?wuid=5669795

---

Proud Founder and member of



Have a look at my WebCam

Added my HTC One V as well.

---

With each crime and every kindness we birth our future.

And the contest for the fastest ARM/Android machine has begin, apparently. You've got my three (combined) beat.

My Nvidia Shield http://setiweb.ssl.berkeley.edu/beta/show_host_detail.php?hostid=64582

My Toshiba Excite Pro http://setiweb.ssl.berkeley.edu/beta/show_host_detail.php?hostid=64580

If you need more ARMs running i can add some more Odroid-U2.


cu JagDoc

Task : 04mr09ab.4618.15614.4.16.24 deleted because reached "Infinity%" and impossible to send back during update.

Same for task : 04mr09ab.4618.15614.4.16.9_1 Task finished with : "Infinity%" result + impossible to send back during update.

3rd task running.

That's really weird. It looks like they were running OK to that point.

---

I attached my Intel Atom Z2420 thinking I'd get a task when/if other procs besides ARM receive support but I appear to be crunching at a rate of approximately 1% per hour.

Which is nice :)

Other tasks probably got trashed while I was scrambling to get my settings sorted.

Do you guys think it'll finish the task on an Intel proc or am I just wasting bandwidth?

Asus Fonepad - essentially a Nexus 7 with phone capabilities and an Atom instead of a Tegra

I attached my Intel Atom Z2420 thinking I'd get a task when/if other procs besides ARM receive support but I appear to be crunching at a rate of approximately 1% per hour.

Which is nice :)

Other tasks probably got trashed while I was scrambling to get my settings sorted.

Do you guys think it'll finish the task on an Intel proc or am I just wasting bandwidth?

Asus Fonepad - essentially a Nexus 7 with phone capabilities and an Atom instead of a Tegra

Strange that it's reported as having an ARMv7 processor rev 1 (v7l) processor, a Boinc Bug?, or because Android Boinc is running on an unsupported CPU?

What does the Boinc say in the Event Log on startup?

Claggy

2 Arm ArmV7 processor rev 1 (v7l)

2 Arm ArmV7 processor rev 1 (v7l)

and what processor features?

Edit: you can eithier copy and paste the log from the device, or email yourself the log, then copy and paste from that.

Claggy

Where did you get the client from? from the Play Store? or from a Manual Download from the Boinc site?

Claggy

2 Arm ArmV7 processor rev 1 (v7l)

and what processor features?

Claggy

Vfp swp half thumb fastmult edsp vfpv3

I also restarted the tablet completely shutting it down to see if anything might change but no. Still showing ARMv7 in event log.

Task was at 5% on restart and stayed there afterwards but elapsed time went from 5hrs to 6min.

Edit: client from Play Store

Edit 2: event log startup

Client Messages

Thu Sep 05 22:58:46 EEST 2013||Resuming network activity
Thu Sep 05 22:58:43 EEST 2013||(to change preferences, visit a project web site or select Preferences in the Manager)
Thu Sep 05 22:58:43 EEST 2013||suspend work if non-BOINC CPU load exceeds 50 %
Thu Sep 05 22:58:43 EEST 2013||don't use GPU while active
Thu Sep 05 22:58:43 EEST 2013||don't compute while active
Thu Sep 05 22:58:43 EEST 2013||max CPUs used: 1
Thu Sep 05 22:58:43 EEST 2013||max disk usage: 9.65GB
Thu Sep 05 22:58:43 EEST 2013||max memory usage when idle: 483.72MB
Thu Sep 05 22:58:43 EEST 2013||max memory usage when active: 483.72MB
Thu Sep 05 22:58:43 EEST 2013||Preferences:
Thu Sep 05 22:58:43 EEST 2013||Reading preferences override file
Thu Sep 05 22:58:42 EEST 2013||Suspending network activity - not connected to WiFi network
Thu Sep 05 22:58:42 EEST 2013||Suspending computation - GUI not active
Thu Sep 05 22:58:40 EEST 2013||Not using a proxy
Thu Sep 05 22:58:40 EEST 2013||(to change preferences, visit a project web site or select Preferences in the Manager)
Thu Sep 05 22:58:40 EEST 2013||suspend work if non-BOINC CPU load exceeds 50 %
Thu Sep 05 22:58:40 EEST 2013||don't use GPU while active
Thu Sep 05 22:58:40 EEST 2013||don't compute while active
Thu Sep 05 22:58:40 EEST 2013||max CPUs used: 1
Thu Sep 05 22:58:40 EEST 2013||max disk usage: 9.65GB
Thu Sep 05 22:58:40 EEST 2013||max memory usage when idle: 483.72MB
Thu Sep 05 22:58:40 EEST 2013||max memory usage when active: 483.72MB
Thu Sep 05 22:58:40 EEST 2013||Preferences:
Thu Sep 05 22:58:40 EEST 2013||Reading preferences override file
Thu Sep 05 22:58:40 EEST 2013|SETI@home Beta Test|URL http://setiweb.ssl.berkeley.edu/beta/; Computer ID 64720; resource share 100
Thu Sep 05 22:58:40 EEST 2013||No usable GPUs found
Thu Sep 05 22:58:40 EEST 2013||Local time is UTC +3 hours
Thu Sep 05 22:58:40 EEST 2013||Disk: 11.72 GB total, 9.74 GB free
Thu Sep 05 22:58:40 EEST 2013||Memory: 967.44 MB physical, 0 bytes virtual
Thu Sep 05 22:58:40 EEST 2013||OS: Android: 3.0.34-00001-g4f8933f
Thu Sep 05 22:58:40 EEST 2013||Processor features: vfp swp half thumb fastmult edsp vfpv3
Thu Sep 05 22:58:40 EEST 2013||Processor: 2 ARM ARMv7 processor rev 1 (v7l)
Thu Sep 05 22:58:40 EEST 2013||Data directory: /data/data/edu.berkeley.boinc/client
Thu Sep 05 22:58:40 EEST 2013||Running as a daemon
Thu Sep 05 22:58:40 EEST 2013||Libraries: libcurl/7.28.1 OpenSSL/1.0.1c zlib/1.2.6
Thu Sep 05 22:58:40 EEST 2013||log flags: file_xfer, sched_ops, task, task_debug
Thu Sep 05 22:58:40 EEST 2013||Starting BOINC client version 7.2.9 for arm-android-linux-gnu

If BOINC runs then good chances SETI app will run too. Perhaps some emulation from Android runtime? AFAIK Android executable is managed code like .Net or Java.

If BOINC runs then good chances SETI app will run too. Perhaps some emulation from Android runtime? AFAIK Android executable is managed code like .Net or Java.

Yeah, yeah, yeah...

GRE 80 - RUS 71 final score :P

Another 7.08 tasks are frozen on same host. After restart they continue with greatly decreased elapsed time (so, they hang few dozen hours w/o any progress or checkpointing). Didn't observe same behavior on another G-tab or with other app versions so far.