Message boards :
Number crunching :
SETI toasted my RTX 2060 in a few days!
Message board moderation
Author | Message |
---|---|
![]() Send message Joined: 29 Nov 01 Posts: 186 Credit: 36,311,381 RAC: 141 ![]() ![]() |
I went away on vacation for a extended weekend and left Seti running on my new system with the RTX 2060 - came back to a failed card. Is this common? I know I can throttle the CPU usage (and I do to 50%), is there a way to throttle the GPU usage as not to stress the card too much? Does Seti not play well with that particular card? Wondering if I just just disable the GPU crunching as I do not want this to happen again. |
Richard Haselgrove ![]() Send message Joined: 4 Jul 99 Posts: 14686 Credit: 200,643,578 RAC: 874 ![]() ![]() |
Thank goodness, for your sake, that it would still have been under warranty. I had a GTX 670 fail on me, about 7 years ago - and one month out of warranty. I lost a GTX 970 to a failed fan last year, after about 3½ years continuous running. Nothing else has failed, even the three GTX 750 Tis which were running on motherboards knocked out by a power surge. I'd say you were just unlucky with a 'Friday build' - nothing to stop you replacing it and picking up where it left off. |
![]() ![]() ![]() Send message Joined: 30 Nov 05 Posts: 282 Credit: 6,916,194 RAC: 60 ![]() ![]() |
My guess is that the card was not over-stressed. The reason I think that is because there are other "special sauces" of seti you can run that stress the GPU more than the stock application. That is to say, it completes the same task in less time. I agree with Richard, you just happened to have been sent a bad card. I've been running a 1660 Ti for several months now 24/7 with no issues. I would just RMA the card. Seti@home classic: 1,456 results, 1.613 years CPU time |
W-K 666 ![]() Send message Joined: 18 May 99 Posts: 19480 Credit: 40,757,560 RAC: 67 ![]() ![]() |
My 2060 has been running continuously, except for the occasional re-boot since I updated this computer on 27th April 2019. As suggested RMA it and get replacement. |
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13882 Credit: 208,696,464 RAC: 304 ![]() ![]() |
Wondering if I just just disable the GPU crunching as I do not want this to happen again.When you get another card, run something like GPUz and check to see what temperature it is running at. 70°c or less and it should be good for 24/7/365 operation for a decade or two. As long as it's not a lemon, any video card that's kept cool will last for years even with continuous operation. Grant Darwin NT |
![]() ![]() ![]() Send message Joined: 29 Apr 01 Posts: 13164 Credit: 1,160,866,277 RAC: 1,873 ![]() ![]() |
I just lost my first RTX 2080 Hybrid. Purchased 2/2019. Rather early for the pump to fail. Normally they fail around 18 months. RMA tomorrow. Seti@Home classic workunits:20,676 CPU time:74,226 hours ![]() ![]() A proud member of the OFA (Old Farts Association) |
tito Send message Joined: 28 Jul 02 Posts: 24 Credit: 19,536,875 RAC: 138 ![]() ![]() |
What I do is to reduce power limit. Then card remains cool, power section is not stressed so much, fans are less noisy. My 1660ti works at minimum 58% power limit in afterburner, while 1080ti is at 200W under Linux. They crunch less, but advantages are significant - additionally no damages to any of my hardware for years. |
Ian&Steve C. ![]() Send message Joined: 28 Sep 99 Posts: 4267 Credit: 1,282,604,591 RAC: 6,640 ![]() ![]() |
I do the same thing. But I actually add overclock to the cards to recover the performance lost from power limiting. Your power limit stays even when overclocked. Win-win. Seti@Home classic workunits: 29,492 CPU time: 134,419 hours ![]() ![]() |
![]() Send message Joined: 29 Nov 01 Posts: 186 Credit: 36,311,381 RAC: 141 ![]() ![]() |
Thanks for all your tips and suggestions! I set up the replacement yesterday so hopefully will have the new card soon. I have shut down seti for now until I get the new card, running the on-board graphics currently. Hopefully this card will last longer! |
juan BFP ![]() ![]() ![]() ![]() Send message Joined: 16 Mar 07 Posts: 9786 Credit: 572,710,851 RAC: 3,799 ![]() ![]() |
When you run seti (or any program who heavily uses the GPU resources) is recommended to increase the fan speed to keep the card cooler. Any program like afterburner or EVGA precision (there are a lot of others) will do that for you. What is important: keep you GPU running cool as possible. ![]() |
![]() Send message Joined: 15 Sep 07 Posts: 190 Credit: 28,269,068 RAC: 5 ![]() |
My 2060 has been running continuously, except for the occasional re-boot since I updated this computer on 27th April 2019. Might I ask as to what temps your are getting on your RTX 2060???? Regards |
W-K 666 ![]() Send message Joined: 18 May 99 Posts: 19480 Credit: 40,757,560 RAC: 67 ![]() ![]() |
My 2060 has been running continuously, except for the occasional re-boot since I updated this computer on 27th April 2019. 52C (126F) with fan on auto. It is only air cooled, I haven't seen need to put the fan to max. I hate fan noise and and case it close enough I can reach far side without moving. I also hate water cooling, used to work on high power radio transmitters with water at 300psi, radiator as big a a large bed. Edit] forgot to say I use Silverstone FHP141 case fans where possible, they are 38mm (1½" depth) |
![]() Send message Joined: 15 Sep 07 Posts: 190 Credit: 28,269,068 RAC: 5 ![]() |
My 2060 has been running continuously, except for the occasional re-boot since I updated this computer on 27th April 2019. Thankyou for that, gives me food for thought with my 2060. |
![]() Send message Joined: 29 Nov 01 Posts: 186 Credit: 36,311,381 RAC: 141 ![]() ![]() |
I just received and swapped the card. Running Seti for about the last 10 minutes along with GPU-Z. GPU temp seems to be holding steady around 65C with the fan speed at 29% - ambient air temp is 68F. I have Seti set to only run 25% of the CPU - currently running around 85C on the CPU. I typically have Seti not run the GPU when I am on the computer, just when I am away. I will re-enable that once I make sure this card does not get too hot. Thanks! |
![]() ![]() ![]() ![]() ![]() Send message Joined: 25 Dec 00 Posts: 31115 Credit: 53,134,872 RAC: 32 ![]() ![]() |
I went away on vacation for a extended weekend Just a thought, was the A/C on? Thinking the ambient temp might have been partly at fault. Of course in winter that isn't it, but trips in summer it can be an issue. 99.99% it was a bad card and I see you have a replacement. |
Grant (SSSF) Send message Joined: 19 Aug 99 Posts: 13882 Credit: 208,696,464 RAC: 304 ![]() ![]() |
GPU temp seems to be holding steady around 65C with the fan speed at 29% - ambient air temp is 68F. GPU is very cool, CPU is extremely hot for such a light workload. Grant Darwin NT |
![]() ![]() Send message Joined: 24 Jan 00 Posts: 37301 Credit: 261,360,520 RAC: 489 ![]() ![]() |
Far too hot.GPU temp seems to be holding steady around 65C with the fan speed at 29% - ambient air temp is 68F.GPU is very cool, CPU is extremely hot for such a light workload. Cheers. |
Ianab Send message Joined: 11 Jun 08 Posts: 732 Credit: 20,635,586 RAC: 5 ![]() |
I'm going with Seti didn't "toast" your GPU, it just caused a manufacturing fault to show up earlier than it otherwise might have. In this case, while it was still in warranty, so it was a GOOD thing. If you had bought the card and decided to run Blender and create the next LOTR movie, it would also have run at 100% (for several years), and also died. So either manufacturers are selling cards that are over specced, or it was faulty. It's a bit like buying a car, and the engine blows up. The dealer then says, "Oh, you took the engine to the red-line, sorry, that's not covered. " Of course it's covered, the "red-line" is what the manufacturer says the engine can safely run at. (and they put a rev limiter there to keep you honest). Same with a computer, if they say it should run at full load a "x" clock speed, then it should . Even if your room gets to warm etc, then the thermal protection "should" kick in and drop the clock speed to keep things safe. Now if you overclock and mess with the cooling? Yeah, you could cook something. Now not every laptop / AIO has sufficient cooling, but the thermal throttling should still stop them melting. BTW, I often use a few days of SETI work as a "burn in test" on a new / repaired machine. If it can run a weekend of that, then it's "good", and some useful work units got done. Seems more use than just doing random prime number tests. |
![]() Send message Joined: 15 Sep 07 Posts: 190 Credit: 28,269,068 RAC: 5 ![]() |
Well I have the following MSI RTX 2060 Ventus XS 6GB Running in PC case in a room of ambiet temp of around 26C, with side cover off, it still manages to get to around 77c - 80c. Well thats not good, but then I did the websearch on this model, turns out, its very common for this model of card, cheap cooling solution. Even checked on the MSI forums, where a couple of respondents have said that is still okay to run. Ummm, its still a hard pill to swallow after paying so much for them here in Australia. Well looks like either I stick this cruncher in the back fridge or move to the South Pole lol. Still to do some more troubleshooting tips, just in case there is a dodgy temp sensor, last time I touched it, it didnt feel that hot though. Cheers |
rob smith ![]() ![]() ![]() Send message Joined: 7 Mar 03 Posts: 22652 Credit: 416,307,556 RAC: 380 ![]() ![]() |
While the finger test can be good, it can be somewhat misleading :-( GPU temperature sensors tend to be well buried within the chips themselves and so the surface temperature will be somewhat lower than that where the probes are. Book your passage to Antarctica ;-) Bob Smith Member of Seti PIPPS (Pluto is a Planet Protest Society) Somewhere in the (un)known Universe? |
©2025 University of California
SETI@home and Astropulse are funded by grants from the National Science Foundation, NASA, and donations from SETI@home volunteers. AstroPulse is funded in part by the NSF through grant AST-0307956.